In gas welding operations, use of the oxy acetylene hose systems is very common. Here, we will give the best oxy acetylene hose applications that you can use for different kinds of applications. They are very good for different kinds of systems and applications.
Best Oxy Acetylene Hose Systems
Check these products they find the best one for yourself.
1/4″ Grade T Welding Hose
- 15 feet long.
- B fittings and stain relief set.
- 1 year of warranty.
If you are looking for a high-quality rubber application, you can consider this one.
- The 15 ft length will be very good and sufficient for most of the welding operations. And also, you can find other lengths in the same seller for up to 100 ft applications.
- The rubber material will provide the best flexibility for this hose.
- The maximum pressure is 300 psi which is one of the most common. The 800 psi burst pressure will provide very good working.
- It is very good for oxy acetylene replacement.
ABN Oxygen Acetylene Hose
1/4″ Oxy Acetylene Hose
- 25 feet long.
- Acetylene rubber.
- 300 psi working pressure.
This one is another welding hose that you can use for your applications.
- The 25 feet length makes it very useful for most applications.
- 300 psi working pressure is generally standard for most applications.
- 9/16-18 is best for the air hose.
- You can use this rubber hose application -20 to 70 Celsius degrees of temperature range.
Hromee Oxygen Acetylene Hose
1/4″ Oxy Acetylene Hose
- 50 feet long.
- 9/16″-18 B welding torch fitting.
- High-quality rubber material.
This one is another high-quality application that you can find.
- The 50 feet long hose will be very useful for large areas and hard-to-reach places.
- The working pressure is 300 psi which is standard for most applications.
- High-quality rubber is flexible and useful in extreme temperatures.
Master Pro Series 25-Foot Oxygen Acetylene Hose
1/4 Inch B Fittings, 9/16”-18
- Comes with regulators.
- 25 feet long.
- 300 psi working pressure.
If you are looking for a 25 feet oxy acetylene hose application from the lowest price, you can consider this one.
- The 25 feet long hose will be sufficient for most of the welding applications.
- The working pressure is 300 psi that you can use for different kinds of applications.
- Flame retardant flexible hose is very useful for such applications.
WeldingCity 50-ft 1/4″ Grade-T Hose
50-ft 1/4″ Grade T Hose
- 50 feet long.
- High-quality rubber.
- Fuel gas welding and cutting.
This one is another high-quality hose application for oxy acetylene welding and cutting operations.
- The total length of the hose is 50 feet which will be very useful for different kinds of large areas.
- And also, you can attach the 1/4″ connection to the general applications. You can find a 3/8″ connection for the same hose from the same seller.
- Complies with RMA/CGA IP-7-2008 standards.
Hot Max 12.5 Feet Hose
12.5 feet Hose Grade R
- 12.5 feet long.
- Grade R application.
Also if you are looking for shorter applications like this one, you can consider this product.
- The 12.5 feet hose length will be very useful for mobile welding applications.
- 3/16 inches of grade R connection.
- You can also find 25 feet hose length from the seller.
26 Ft Oxy Acetylene Hose
26 feet Hose
- 1/4 inch of connection.
- 9/16 inches of 18B fittings.
- Welding twin torch hose application.
You can use this hose for 300 psi working pressure applications. And also the burst pressure is 900 psi which will provide very good safety.
- Compliant with 9/16 inches-18 equipment.
- 1/4 of diameter hose.
Selecting a Proper One for Oxy Acetylene Welding and Cutting
There are different kinds of parameters that you need to consider about the oxy acetylene hose applications that you will use. If you consider these parameters, it will be much easier for you to select the best one for you.
- Length: The length of the hose is the prime parameter that affects the price. So, if you do not need additional length after 25 ft, you do not need to pay money for extra length. You need to assess the general length requirement for your hose application.
- Grade: There are different kinds of grades available. But most professionals are suggesting grade R oxy acetylene welding hoses for different kinds of applications.
- Diameter: Also, you can find 1/4″ and 3/8″ internal diameters. Which one fits your system, you need to select that one.
- Fitting dimensions: Also you need to consider the sizes of the connection regulators to the torch and the tubes.
The parameters like hose material, color, and working pressure values are generally standard for most of applications.
Conclusion
So, these are the general parameters that we can consider about the oxy acetylene hose applications. It will be much easier to select one for you with this review post.
If you have additional comments and questions about this topic, please leave them below.
And also, you can find other useful and insightful articles about welding on fmechanic.com!
Welding Arm Pad Applications – Different Types and Styles
Weldable Tabs – General Prices and Uses
Carbon Fiber Welding Hood – Prices, Advantages, and Review
